College of Technology and Applied Sciences

technology.poly.asu.edu
Albert L. McHenry, PhD, Dean

Aeronautical Management Technology, Department of

Electronics and Computer Engineering Technology, Department of

Engineering, Department of

Mechanical and Manufacturing Engineering Technology, Department of

Technology Management, Department of

Computing Studies, Division of

PURPOSE

The College of Technology and Applied Sciences (CTAS) helps students develop knowledge and skill in technological fields that qualify them for career positions and leadership responsibility in industry, government, and commercial enterprise. Each student is guided to select a major that addresses short-term employment goals through state-of-the-art technological preparation. Long-term career aspirations are supported through the development of a strong base in mathematics, science, engineering, and technical principles, coupled with a solid foundation in liberal arts and a commitment to lifelong learning.

Engineering technology programs offer professional preparation through a BS degree that stresses state-of-the-art technological applications. Special emphasis is placed on the development of knowledge and skill in applied mathematics, natural sciences, and engineering principles with formal laboratory experiences. This mixed educational approach provides the basis for both employment and a long-term career evolution.

The other CTAS technology programs provide the opportunity for students to develop knowledge and skill in solving broad-scale industrial problems, operating modern technological systems, and managing personnel in the implementation of processes and production. Programs of study focus on the latest technologies in areas such as aviation flight training and management, environmental technology management, graphic information technology, fire service management, and industrial management.

Each student is encouraged to participate in creative activities through a close relationship with a faculty mentor. Learning through execution of the scientific method, using both inductive and deductive processes in applied research activities, is essential for both faculty and students.

ORGANIZATION

The College of Technology and Applied Sciences is composed of the following six academic units:

Department of Aeronautical Management Technology

Department of Electronics and Computer Engineering Technology

Department of Engineering

Department of Mechanical and Manufacturing Engineering Technology

Department of Technology Management

Division of Computing Studies

DEGREE PROGRAMS

See the College of Technology and Applied Sciences Baccalaureate Degrees and Majors table, below. For graduate degrees, see the College of Technology and Applied Sciences Graduate Degrees and Majors table, below.

The College of Technology and Applied Sciences offers programs leading to the BS degree and BAS degree. The college also offers the Master of Science in Technology (MST) degree and the Master of Computing Studies degree (MCST). For more information, see the Graduate Catalog.

ACCREDITATION

Undergraduate BS degree programs in Electronics Engineering Technology, Manufacturing Engineering Technology, and Mechanical Engineering Technology are accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology, Inc. For additional information, call 410/347-7700, or write

TECHNOLOGY ACCREDITATION COMMISSION OF THE ACCREDITATION BOARD FOR ENGINEERING AND TECHNOLOGY INC

111 MARKET PLACE SUITE 1050

BALTIMORE MD 21202-7102

Both the professional flight and the air transportation management concentrations in the Department of Aeronautical Management Technology are fully accredited by the Council on Aviation Accreditation. For more information, call 334/844-2431, send e-mail to caa@auburn.edu, or write

COUNCIL ON AVIATION ACCREDITATION

3410 SKYWAY DRIVE

AUBURN AL 36830

The Bachelor of Science degrees in Environmental Technology Management, Graphic Information Technology, and Operations Management are fully accredited by the National Association of Industrial Technology (NAIT). For more information, call 734/677-0720, or write

NATIONAL ASSOCIATION OF INDUSTRIAL TECHNOLOGY

3300 WASHTENAW AVENUE SUITE 220

ANN ARBOR MI 48104-4200

ADMISSION—BS DEGREE

The College of Technology and Applied Sciences admits first-year students who meet the undergraduate admission requirements of ASU. See Undergraduate Admission. High school precalculus, physics, and chemistry are recommended. Transfer applicants must meet the university requirements for transfer students as specified under Transfer Credit.

First-year students (new freshmen) are admitted to CTAS with professional status if they meet the general aptitude criteria for admission. First-year students admitted upon completion of the GED may be admitted if they have also achieved the minimum ACT or SAT scores required for undergraduate admission to the university.

Students transferring from other ASU colleges may be admitted to CTAS with professional status if they meet the required GPA.

Transfer students from other institutions must meet the minimum admission requirements for college transfer students as described under Transfer Credit.

All international students must have a minimum 500 TOEFL score to be admitted with professional status.

For those students who are admitted to the professional flight concentration, in the Department of Aeronautical Management Technology, a secondary application process is required.

Transfer Credit

Credit for courses taken at a community college or another four-year institution is awarded according to the guidelines under Transfer Credit. Students who are transferring from an Arizona community college and have been in continuous residence may continue under the catalog in effect at the time of their entrance into the community college. Students should be aware that some course work that transfers to ASU may not be applicable toward CTAS degree requirements. Students should confer with an advisor. The College of Technology and Applied Sciences maintains a cooperative agreement with most Arizona community colleges and with selected out-of-state colleges and universities to structure programs that are directly transferable into the technology programs at Polytechnic campus. For assistance in transferring from Arizona community colleges, transfer guides are available at www.asu.edu/provost/articulation.

Courses taken more than five years before admission to a CTAS degree program are not normally accepted for transfer credit at the option of the department in which the applicant wishes to enroll. Courses completed within the five years preceding admission are judged as to their applicability to the student’s curriculum.

ADMISSION—BAS DEGREE

Admission to the BAS degree program is restricted to students holding an AAS degree from a regionally accredited U.S. postsecondary educational institution. A GPA of 2.00 or higher is required for all resident applicants and a 2.50 for nonresident applicants.

ADVISING

New incoming and transfer students should seek initial advising from an academic advisor in the Dean’s Office. CTAS students are then assigned faculty advisors who assist them with planning a program of study in the department of their major. The college requires that students consult with advisors before registering each semester. Advisors should be made aware of any employment obligations or special circumstances that may affect a student’s ability to successfully handle a full course load. CTAS students may register for a maximum of 19 semester hours per semester. Any student wishing to take more than the maximum must petition the CTAS Standards Committee and have an approval on file before registering for a course overload.

GRADUATION REQUIREMENTS

Students must meet all university graduation requirements given in University Graduation Requirements, as well as degree requirements of their major in the College of Technology and Applied Sciences. For detailed information on the degree requirements of a major in CTAS, refer to that department’s individual description.

COLLEGE STANDARDS

Pass/Fail Grades

The College of Technology and Applied Sciences does not offer pass/fail grades. Courses graded on a pass/fail basis do not count toward degree credit in CTAS. Students may request credit for pass/fail courses by petitioning the CTAS Standards Committee.

Entry into Upper-Division Courses (BS Degree)

Before enrolling in courses at the 300 level and above, CTAS students must be in professional status within the college. Students who are not in good academic standing must petition the CTAS Standards Committee. Students enrolled in another ASU college may not register for any 300- and 400-level CTAS courses unless those courses are required in the degree program and the students have the proper course prerequisites.

ACADEMIC STANDARDS

Retention

A student is expected to make satisfactory progress toward completion of degree requirements to continue enrollment in the College of Technology and Applied Sciences. Any one of the following conditions is considered unsatisfactory progress and results in the student’s being placed on probationary status:

1. a semester with a GPA less than or equal to 1.50;

2. two successive semesters with GPAs less than 2.00; or

3. an ASU cumulative GPA less than 2.00.

A student on probation is subject to disqualification if (1) a semester GPA of 2.25 is not attained and the cumulative GPA is below 2.00 at the end of the probationary semester or (2) the student is placed on probation for two consecutive semesters and is unable to achieve the standard GPA stated in number one.

Students on academic probation are not allowed to register for more than 13 semester hours. Probationary students may not register for the semester following the semester in which they were declared probationary without a special permit from an advisor in the dean’s office. Special permits are given only after the registrar records grades for the current semester.

Disqualification

During a semester on academic probation, a student who fails to meet the retention standards is disqualified. Students may request a review of their disqualification status by contacting the CTAS associate dean in the College of Technology Dean’s Office. Any disqualified student who is accepted by another college at ASU may not register for courses in CTAS unless the courses are required in the new major. Disqualified students who register for courses in CTAS may be withdrawn from these courses any time during the semester.

Reinstatement

The college does not accept an application for reinstatement until the disqualified student has remained out of the college for at least a 12-month period. Merely having remained in disqualified status for this period of time does not, in itself, constitute a basis for reinstatement. Proof of ability to do satisfactory college work in the chosen discipline is required; for example, completing pertinent courses in the discipline at a community college with higher-than-average grades.

STUDENT RESPONSIBILITIES

Course Prerequisites

Students should consult the Schedule of Classes and the catalog for course prerequisites. Students who register for courses without the designated prerequisites may be withdrawn without their consent at any time before the final examination. The instructor, the chair of the department, or the dean of the college may initiate such withdrawals. In such cases, students do not receive monetary reimbursement.

SPECIAL PROGRAMS

Academic Recognition

Students completing baccalaureate degree requirements receive the appropriate honors designations on their diplomas consistent with the requirements specified by the university.

Students in the college are encouraged to seek information concerning entry into honor societies that enhance their professional stature. Tau Alpha Pi is the engineering technology honor society, and Alpha Eta Rho is available for aeronautical management technology students.

Barrett Honors College

The College of Technology and Applied Sciences participates in the programs of the Barrett Honors College, which provides enhanced educational experiences to academically superior undergraduate students. Participating students can major in any academic program. For more information, see The Barrett Honors College.

Scholarships

Information and applications for academic scholarships for continuing students may be obtained by contacting departmental offices. Other scholarships may be available through the university’s Student Financial Assistance Office.

ROTC Students

Students pursuing a commission through either the Air Force or Army ROTC program must take 12 to 20 semester hours of courses in the Department of Aerospace Studies or Department of Military Science. To preclude excessive overloads, these students should plan on at least one additional semester to complete degree requirements. Because of accreditation requirements, aerospace studies (AES) or military science (MIS) courses are not accepted for engineering technology majors.

Omnibus Courses. For an explanation of courses offered but not specifically listed in this catalog, see Omnibus Courses.

Graduate-Level Courses. For information about courses numbered from 500 to 799, see the Graduate Catalog, or access www.asu.edu/aad/catalogs on the Web. In some situations, undergraduate students may be eligible to take these courses; for more information, see Graduate-Level Courses.